HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Google Scholar Articles by Deiana, R. Articles by Bruno, V. Search for Related Content PubMed Articles by Deiana, R. Articles by Bruno, V. GeoRef GeoRef Citation Agricola Articles by Deiana, R. Articles by Bruno, V. Related Collections Downhole/Borehole Methods Ground Penetrating Radar, GPR

SPECIAL SECTION: GROUND PENETRATING RADAR IN HYDROGEOPHYSICS

Calibration of a Vadose Zone Model Using Water Injection Monitored by GPR and Electrical Resistance Tomography

^a Dipartimento di Scienze Geologiche e Geotecnologie, Univ. of Milano-Bicocca, Milan, Italy
^b Dipartimento di Geoscienze, Univ. of Padua, Padova, Italy
^* Corresponding author (giorgio.cassiani{at}unipd.it).

Received 17 September 2006.

The noninvasive characterization of the vadose zone has been the objective of intense research aiming at collecting data for the calibration of flow and transport models. This interest is motivated by the difficulty of accessing the vadose zone with direct methods without causing disturbance to the natural conditions. On the other hand, characterizing the vadose zone requires detailed knowledge of space and time variations of water distribution. Geophysical methods capable of imaging the moisture content, such as ground penetrating radar (GPR) and electrical resistance tomography (ERT), provide data with high resolution in space and time: natural infiltration and artificial injection (tracer) tests can be imaged, by repeating measurements over time (time-lapse mode). We conducted a forced-injection experiment at a test site in Gorgonzola, east of Milan (Italy). The site is characterized by Quaternary sand and gravel sediments that house an extensive unconfined aquifer. We used ERT and GPR in two-dimensional cross-hole configuration and time-lapse mode during a period of several days preceding and following a tracer experiment with the injection of about 20 m³ of fresh water in a purposely excavated trench. The calibration of a three-dimensional infiltration model on the basis of the geophysical data provides useful estimates of vertical saturated hydraulic conductivity; however, we observed a discrepancy in mass balance between calibrated simulations and measurements. This fact cannot be explained using a simple isotropic model for hydraulic properties; therefore, the method requires further investigation before being fully established.

Abbreviations: ERT, electrical resistance tomography • GPR, ground penetrating radar • MOG, multioffset gather • ZOP, zero-offset profile

This article has been cited by other articles:

				S. Lambot, A. Binley, E. Slob, and S. Hubbard Ground Penetrating Radar in Hydrogeophysics Vadose Zone J., February 25, 2008; 7(1): 137 - 139. [Full Text] [PDF]