HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Abstract Full Text Free Full Text (PDF) Free Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (2) Citing Articles via Google Scholar Google Scholar Articles by Plummer, M. A. Articles by Fox, D. T. Search for Related Content PubMed Articles by Plummer, M. A. Articles by Fox, D. T. GeoRef GeoRef Citation Agricola Articles by Plummer, M. A. Articles by Fox, D. T. Related Collections Radionuclides Diffusion Experiment Design Vadose Zone Processes and Chemical Transport

Transport of Carbon-14 in a Large Unsaturated Soil Column

Idaho National Engineering and Environmental Laboratory, P.O. Box 1625, MS 2107, Idaho Falls, ID 83415-2107

View larger version (24K): [in a new window]   Fig. 1. Location of the Subsurface Disposal Area (SDA) of the Radioactive Waste Management Complex (RWMC) at the Idaho National Engineering and Environmental Laboratory (INEEL).

View larger version (46K): [in a new window]   Fig. 2. Schematic diagram of the mesoscale unsaturated flow column showing vertical placement of sampling and monitoring devices.

View larger version (56K): [in a new window]   Fig. 3. Schematic diagram (plan view) of instrumentation at each of the eight sampling and monitoring levels and at Level 0, where water is removed via suction lysimeters.

View larger version (51K): [in a new window]   Fig. 4. Water content and moisture potential histories since start of water application, 11 July 2001. (A) Reflectometer data; (B) the moisture potential record, as measured with in-situ tensiometers; (C) the average water content calculated from the column water balance data. Note that the reflectometer at Level 1 malfunctioned and was used only as a relative measure of water content. Lettered vertical lines indicate the date of (a) the Br– injection, (b) soil sampling, (c and d) sulfur hexafluoride gas injections, and (e) the 14C-labeled bicarbonate injection.

View larger version (22K): [in a new window]   Fig. 5. Comparison of modeled and observed SF6 breakthrough curves for (A) the initial, prewetting, SF6 test and (B) the first test conducted after reaching near steady-state flow. The modeled curves were computed from an analytical solution (Luikov, 1968) to the diffusion equation.

View larger version (18K): [in a new window]   Fig. 6. Bromide concentration data (symbols) from the six sampling levels below the injection plane and CXTFIT2-fit curves (lines).

View larger version (33K): [in a new window]   Fig. 7. Measured 14C gas-phase breakthrough curves (symbols) and simulated responses (lines) at each sampling level. Simulated curves were calculated from an analytical solution to a conceptual model that considers reactive diffusive transport in the gas phase, but neglects aqueous transport. Average column water content was set to 28%; Kd = 0.45 mg L–1 was determined via least squares fit to the observations.

View larger version (26K): [in a new window]   Fig. 8. Calculated aqueous/gas partitioning ratio profile (solid line) for the 14C transport experiment, based on pH measurements made just before the 14C injection and measured aqueous-gas partitioning ratios (symbols) following the 14C injection, based on aqueous- and gas-phase 14C measurements from each sampling level.

View larger version (33K): [in a new window]   Fig. 9. Measured 14C gas-phase breakthrough curves (symbols) and simulated responses (lines) at each sampling level. Simulated curves were calculated using the multiphase flow and transport model STOMP, using the nonuniform, pH-based, aqueous/gas partitioning ratio profile shown in Fig. 8. Average water content for the flow simulation was 28%; Kd 0.5 mg L–1.

View larger version (32K): [in a new window]   Fig. 10. Measured 14C aqueous-phase breakthrough curves (symbols) and simulated responses (lines) at each sampling level. Simulated curves were calculated using the multiphase flow and transport model STOMP, using the nonuniform, pH-based, aqueous/gas partitioning ratio profile shown in Fig. 8. Average water content for the flow simulation was about 28%; Kd 0.5 mg L–1.

View larger version (20K): [in a new window]   Fig. 11. Mass balance on effluent from the column and 14C remaining in the column, from effluent monitoring and samples collected approximately 1 yr after injection.